What Happens to the Paperwork After Your Private Power Pole Goes In?
What happens to the paperwork after your private power pole goes in? Your Level 2 ASP has to send the network an as built sketch of the finished overhead service, showing pole numbers and boundary measurements, before the job is truly signed off. It sounds like a small administrative step, but it is the record the network, future electricians and even a future buyer's conveyancer will rely on for the life of that pole.
1. What Clause 3.2.6 Actually Requires
Clause 3.2.6 of the Service and Installation Rules of NSW sits in the overhead services section, alongside the rules for spans, point of attachment and private poles themselves. It requires the installer, your accredited Level 2 ASP, to send the network a sketch of the as constructed overhead service once the work is finished. That sketch has to show the pole numbers involved and the boundary measurements of the route, so the network has an accurate picture of exactly where the service actually ended up, not just where it was originally planned to go.
This is submitted as part of the Notification of Service Work, the same notification your Level 2 ASP lodges within two working days of finishing a job. The sketch travels with that notification rather than as a separate document, which is why most homeowners never see it directly, it is a trade to network record rather than a certificate handed to the customer.
2. Why Pole Numbers and Boundary Measurements, Specifically
A plan drawn up before a job starts is a proposal. Real sites rarely match a proposal exactly, a pole might end up thirty centimetres from where it was first marked out, a span might run slightly differently to avoid a tree or a service pit discovered on the day. The as built sketch exists to close that gap between plan and reality.
Pole numbers tie the sketch to the network's own asset register, so a pole that supplies your property is identifiable the same way on a network map as it is on your own paperwork. Boundary measurements fix the pole and the route relative to the property boundary itself, which matters far beyond the day of installation, surveyors, conveyancers and future electricians all rely on boundary relative measurements rather than street addresses alone when locating infrastructure precisely.
3. How This Fits Alongside the NOSW and Certificate of Compliance
The as built sketch is one part of a small bundle of paperwork that closes out an overhead service job. Alongside it, your Level 2 ASP lodges the Notification of Service Work itself, and issues a Certificate of Compliance for Electrical Work once testing and commissioning confirm the installation is safe to energise. None of these documents replace each other, the certificate covers the electrical safety of the finished work, the notification tells the distributor the job happened and supply status has changed, and the as built sketch tells the network exactly where everything physically sits.
If your job also involved a service protection device upgrade or any change to the point of connection, those details typically get noted alongside the sketch, so the network's record reflects the complete scope rather than only the pole position.
4. Why This Record Matters Years Later
Most homeowners never think about this sketch again after the job wraps up, until something near the pole changes. If Ausgrid or Endeavour Energy issues a defect notice years later, the technician responding to it starts from the network's own record of where the pole and service sit. An accurate as built sketch means that starting point is correct, which genuinely speeds up how fast a defect notice rectification can be scoped and quoted.
It also matters at sale time. A conveyancer or a buyer's own electrician checking what infrastructure sits on a title will rely on the same boundary relative record, particularly on a subdivided block where more than one party now has an interest in exactly where a shared or adjoining service runs.
5. What Happens if the Sketch Is Wrong or Never Submitted
In practice, a missing or inaccurate as built sketch rarely stops a job being energised, the network's priority on the day is that the connection is safe and correctly tested. The real cost shows up later. A future electrician working near an inaccurately recorded pole has to re survey the site from scratch rather than trusting the record, which adds time and cost to work that should have been straightforward. A disconnect and reconnect job, in particular, moves faster when the existing paperwork is accurate, since the crew already knows exactly what they are dealing with before they arrive.
This is one of the quieter reasons it pays to use an experienced, accredited Level 2 ASP rather than the cheapest quote on a private pole job, lodging accurate paperwork takes the same care as the physical installation, and cutting corners on one often means corners were cut on the other.
6. Which Jobs This Applies To
Clause 3.2.6 applies specifically to overhead service work, so it covers a brand new private power pole installation, a pole replacement that changes position even slightly, and any job that alters the route of the overhead service between the network's pole and your property. An underground connection has its own separate as built record requirements under Section 2 of the same rules, which we cover in our guide to underground private power pole easements, since underground and overhead services are tracked differently by the network for obvious reasons.
A straightforward overhead to underground conversion actually triggers both sets of requirements in sequence, the overhead decommissioning gets its own closing record, and the new underground route gets its own as built documentation once it is in the ground.
Why It's Level 2 ASP Work
Lodging an accurate Notification of Service Work, including the as built sketch required under Clause 3.2.6, is accredited work under the Service and Installation Rules of NSW and the relevant distributor's Electrical Safety Rules. Only a Level 2 ASP can prepare and submit this paperwork to Ausgrid or Endeavour Energy on your behalf, and the network relies on that accreditation as its guarantee the record reflects what was actually installed and tested. Confirm the current edition of the Service and Installation Rules with your Level 2 ASP if a job involves anything unusual about the route or pole position.
How High Demand Electrical Helps
High Demand Electrical is one of Sydney's most trusted Level 2 ASPs for private power pole work, and that reputation rests as much on the paperwork trail as on the physical install. Every private pole job we complete closes out with an accurate as built sketch, the Notification of Service Work, and a Certificate of Compliance for Electrical Work, lodged properly the first time rather than chased up later.
We service homes and businesses across Sydney's West, South West and Sutherland Shire, and if you are planning a new pole, a replacement, or any change to an existing overhead service, we will walk you through exactly what paperwork the job generates and who ends up holding a copy, so there are no surprises down the track.
Get a Power Pole Installation Quote
If you need a new private power pole, a replacement, or any change to an existing overhead service, get a power pole installation quote from High Demand Electrical. Call 0402 559 777. Every job needs a site assessment before scope or pricing can be confirmed, and we will make sure the paperwork, including the as built sketch the network requires, is lodged correctly the first time.
For the Inner West version of switchboard and network facing labelling requirements, see HD Inner West's guide to solar switchboard labelling. For general Level 2 ASP background across Sydney, see the main site's Level 2 electrician Sydney page.
Need a Level 2 ASP for your private power pole? Call the High Demand Power Poles Sydney team for a free quote.
Call 0411 719 093Related reading
Ready to get your power pole sorted?
Fill out the form and our expert team will get back to you shortly. Whether it’s an emergency or a planned installation, we’re ready to help: fast, safe, and professional.



