Timber vs Steel vs Composite Power Poles
Which Private Power Pole Is Right for You?
Most Sydney homes on a private pole have treated hardwood timber, but it's no longer the only option. Galvanised steel and fibreglass composite poles both avoid the rot and termite damage that ends most timber poles early. As a licensed Level 2 ASP (Licence 397193C), we install all three and connect them to the Ausgrid or Endeavour Energy network.
Contact US

What to Weigh Up When Choosing
We look at these factors during the site inspection before recommending a pole type.
- Distance from the coast and salt air exposure
- Termite activity in your area
- Soil and drainage around the pole
- Bushfire risk for your property
- Span and load from the service line
- Clearance needed over driveways
- Your budget now versus long-term upkeep
- How long you want the pole to last
The Three Pole Types at a Glance
- Treated Hardwood Timber
Lowest upfront cost and the heaviest. At risk of rot and termites at ground level, so it needs regular inspection. Best for budget replacements and rural blocks. - Galvanised Steel
Medium cost and weight. Does not rot and termites can't damage it, but salt air can corrode it over time. Best for most homes and commercial sites. - Composite / Fibreglass
Highest upfront cost and the lightest. Won't rot, rust or corrode. Best for coastal, bushland and install-once jobs.
How We Help You Choose and Install
Site Inspection
We look at your soil, location, span, clearances and budget, and check the condition of any existing pole.
Straight Recommendation
We tell you which pole type suits your site and why, including when timber is still the sensible choice.
Fixed Written Quote
You get a written quote for the pole type you choose, covering labour, network coordination and paperwork.
Network Booking
We lodge the notification with Ausgrid or Endeavour Energy and book the disconnection.
Installation
The old pole is removed if needed, and your new timber, steel or composite pole is set, fitted and connected.
Testing and Certificate
We test your supply and provide the Certificate of Compliance for Electrical Work (CCEW).

Why Owners Ask Us for Advice
- We install all three pole types, so our advice isn't one-sided
- Licensed Level 2 ASP, Licence 397193C
- Ausgrid and Endeavour Energy paperwork handled
- Single phase and three phase poles
- Fixed written quote before work starts
Why Sydney Chooses Us for Private Power Poles
When you choose High Demand Power Poles, you get honest advice and one team for the whole job. Here's what sets us apart:
- Recommendations based on your site, not a single product
- One team for the pole, connection and paperwork
- Timber, steel and composite poles supplied and installed
- Outage window agreed with you before the work day
- Certificate of Compliance provided on completion
- Licensed Level 2 ASP team authorised for network-side work
FAQs
Still deciding on a pole type? These are the questions owners ask us most.
Composite and steel generally outlast timber because neither rots. Composite also resists corrosion, which gives it the edge on coastal blocks.
Yes, when the pole is correctly rated for the job and installed by a Level 2 ASP to Ausgrid or Endeavour Energy requirements.
Yes. Swapping an old timber pole for steel or composite is common, and it's done in the same job as the replacement.
It can be. Timber has the lowest upfront cost and suits many rural and budget jobs. It just needs regular inspection to catch rot and termites early.
Composite is usually the best choice for coastal properties, because salt air can corrode steel and speed up timber decay.
Testimonials
Ready to get your power pole sorted?
Fill out the form and our expert team will get back to you shortly. Whether it’s an emergency or a planned installation, we’re ready to help: fast, safe, and professional.


