Private Power Pole Replacement in Killara
Private Power Pole Replacement Sydney
Licensed replacement of rotten, leaning or damaged private power poles, with safe reconnection to the network.
Is the private power pole on your Killara property leaning, split or showing signs of rot? High Demand Power Poles replaces private power poles across the North Shore. As licensed Level 2 ASP specialists, we remove the old pole, install a compliant new one and reconnect your supply to Ausgrid standards.


What is Private Power Pole Replacement?
Power pole replacement means removing a private pole that can no longer be safely repaired and installing a new one in its place. Poles wear out from rot, rust, termite damage, impact or age, and a pole that has failed can leave your property without a legal, safe supply.
At High Demand Power Poles, our Level 2 ASP team assesses the pole, plans the replacement, installs the new pole and reconnects your overhead supply, working to Ausgrid and Endeavour Energy standards.
Replacing a failing pole before it falls protects your property, avoids emergency callouts and helps you meet network requirements.
Replacing a Private Power Pole in Killara
Killara's large leafy blocks often have long private service lines running from the street to the house. Mature trees, sloping driveways and long spans all affect how a pole is replaced, so we check clearances and access first and plan the work around your garden.

New Private Pole and Overhead Service in Killara
Why we were called
A Killara property needed a new private pole with a single-phase overhead service from the network pole.
What we did
- Installed a new private pole
- Supplied and installed a private pillar
- Ran single-phase overhead service mains from the network pole to the private pole
- Fitted fuses to protect the existing underground consumer mains
The result
The property is now fed from the network through its own private pole, and the existing underground consumer mains are protected by new fuses.
Private Pole or Network Pole? Who Is Responsible?
Before any work starts, it helps to know who owns the pole. In general, the rules differ between a pole on your property and one on the street.
Private power pole
A private pole sits on your property and carries the service line to your home or business. As the property owner, you are generally responsible for maintaining it and for replacing it when it fails. This is the work High Demand Power Poles does.
Network pole
A network pole is owned by the electricity network, such as Ausgrid, Endeavour Energy or Essential Energy, and is usually on the street or road reserve. If you think a network pole is damaged, report it to the network provider rather than arranging repairs yourself.
Not sure which one you have? Send us a photo or call us and we will help you work it out before any work is booked.
Pole leaning, cracked or rotting? Get a replacement quote.
Level 2 ASP electricians, available 24/7 across Sydney. We will tell you whether the pole can be repaired or needs replacing.
Signs Your Private Power Pole Needs Replacing
- Rot or Rust at the Base
Soft, crumbling or corroded timber or steel at ground level weakens the pole and can lead to failure in wind or storms. - Cracking and Splitting
Deep cracks along the pole let moisture in and reduce its strength, especially on older timber poles. - A Pole That Is Leaning
A pole leaning more than it used to is losing its footing and puts strain on your service line and point of attachment. - Termite or Impact Damage
Termites, vehicle strikes or falling branches can hollow out or damage a pole, even when it still looks upright. - Defect Notices
If a defect notice from Ausgrid or Endeavour Energy can't be cleared by repair, the pole needs to be replaced.
At High Demand Power Poles, we assess the pole first and tell you whether it can be repaired or must be replaced.
Our Private Power Pole Replacement Service Includes
Pole Assessment
We inspect the pole for rot, corrosion, cracking, leaning and damage to confirm it needs replacing, and we document what we find.
Planning and Network Approvals
We confirm the pole type, position and clearances, and arrange the network approvals and notifications the job needs.
Old Pole Removal
The failed pole is safely removed from site so the new pole can be set.
New Timber, Steel or Composite Pole
We install a new pole chosen to suit your site and network requirements, fitted with the required hardware.
Point of Attachment
We fit or relocate the point of attachment on the new pole so overhead lines are secure and compliant.
Consumer Mains Reconnection
We reconnect and, where needed, replace the consumer mains from your new pole to your switchboard.
Defect Notice Clearing
If the network has issued a defect notice on your pole and it cannot be repaired, we replace it and clear the notice.
Compliance Checks
We check the finished installation meets network safety standards and is ready for any re-inspection.
Fitted by Level 2 ASP Electricians
Replacement work is done by accredited Level 2 electricians who follow Ausgrid and Endeavour Energy requirements.
Temporary Power During Replacement
Where the job needs it, we arrange temporary power so work can proceed with minimal disruption.

How We Replace Your Private Power Pole
Every pole and property is different. Our licensed Level 2 electricians assess the site and recommend the right pole type and position for your supply and network requirements.
- Assess the Pole
We inspect the pole and confirm whether it can be repaired or must be replaced. - Plan and Approve
We confirm the pole type, position and clearances, and arrange the network approvals and notifications. - Remove and Install
The old pole is safely removed and a new pole is set and fitted with the required hardware. - Reconnect and Sign Off
Your service line is transferred to the new pole, your supply is reconnected and tested, and we handle the paperwork.
Why Choose High Demand Power Poles for Private Pole Replacement?
Replacing a private pole is licensed electrical work, not a general handyman job. Here's what sets us apart:
- Private Pole Specialists
Private and temporary power poles are all we do, so we know why poles fail and how to replace them properly. - Clear Quotes
We explain what's included after a site check, so you know the scope before we start. No hidden extras. - Fast and Reliable Service
If your pole has failed or is storm damaged, call us. Our Sydney-wide team is available 24/7 for urgent callouts. - Safety Compliance First
Every job follows Ausgrid, Endeavour Energy and NSW safety rules, protecting your property and your supply. - Licensed Level 2 ASP
High Demand Electrical is a Licensed Level 2 ASP (Licence 397193C), so poles are replaced and reconnected by qualified electricians.
At High Demand Power Poles, we deliver more than a new pole. We deliver compliance, safe reconnection and peace of mind for your property.
Western Sydney
Inner West
Eastern Suburbs
North Shore
Northern Beaches
St George & Canterbury-Bankstown
Sutherland Shire
Parramatta
FAQs
Here are some common questions we get about private power pole replacement:
Testimonials

LET’S TALK ABOUT YOUR POWER POLE
Request a call back
Leave your details and our team will be in touch to help with your enquiry.
Ready to secure your property with Power Poles service?
Fill out the form and our expert team will get back to you shortly. Whether it’s an emergency or a planned installation, we’re ready to help—fast, safe, and professional.


